Don't close this page .. Test is protected .. Answers cannot be changed .. We try now to connect to save and correct your answers.
Connection trial number:
If this message persists for long, please check your internet connection.
This test is monitored
Switching to another webpage or any other program is considered a cheating behavior and your test may be automatically terminated.
Okay
Important Notice
If you moved to the next question, you will not be able to come back to this question again.
Cancel
Move to next question
Unit 18 - Prepare for general electrical installations Quiz 6
Student data
×
Student data
Student name: ***
Student number: ***
Class or section: ***
Test instructions
×
Test instructions
Page direction
×
Change page direction
Right to left
Left to right
Q1
Score: 1
Electric shock from direct contact
Electric shock from indirect contact.
Electric shock from overcurrent
Electric shock from undervoltage
Q2
Score: 1
Provide enough spaces
Save a lot of money
Provide protection against overload and short circuit current
Daily demand
Q3
Score: 1
Current
Potential
impedance
Angle
Q4
Score: 1
Residual current device.
Motor rated fuse.
Starter contactor
Surge protective device
Q5
Score: 1
Switch must be accessible in an emergency
Switch must be able to break full-load current
Switch must be a remote stop button
Switch must be an off-load isolator
Q6
Score: 1
emergency switching
isolator
a fireman's switch
partial disconnection
Q7
Score: 1
Capable of breaking the full load of the circuit
Be manually operated directly interrupting the main circuit
Capable of regulating the voltage
Be provided with means of operation capable of latching in the “OFF” or “STOP position”
Q8
Score: 1
Large circuit currents.
Large short circuit currents.
Out of balance circuit currents.
Reduction in circuit currents
Q9
Score: 1
It is expensive
Needs extra voltage to operate
Requires time for the heat to build in the heater before the bimetal bends
Operates instantaneous
Q10
Score: 1
High electrical and thermal resistance
High mechanical strength in tension, compression and shear
High resistance to fatigue failure
Low electrical resistance of surface films
Questions you haven't answered yet:
Are you sure you want to end this test and send your answers?
All copy rights reserved
©
arab-exams.com
2014-2023
Dismiss this alert